Specifying The E-Mail Address Of The Machine; Connecting A Modular Cable - Konica Minolta bizhub C203 Operation Manual
Network scanner operations / fax operations / network fax operations
Hide thumbs
Also See for bizhub C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
4
Specifying the E-Mail address of the machine
%
To send scanned data as an E-Mail message or to use the Internet fax function, register the E-Mail
address on the machine beforehand.
–
This E-Mail address is used when sending and receiving data. Generally, it is recommended that the
E-Mail address registered for the administrator be used.
–
If the E-Mail address registered for the administrator is not specified, the E-Mail address of the
sender must be entered for each Scan to E-Mail operation. Scan to E-Mail operations are not
possible without address entry.
!
Detail
When user authentication is enabled, the E-Mail address specified for each user is used as the sender's
address.
For details on specifying the E-Mail address of this machine, refer to the User manual – Network
Administrator.
4.1.3
Connecting a modular cable
When sending/receiving faxes via a phone line, modular cable connection is needed. To use the G3 fax
function, an optional fax kit must be installed. Also, to use two lines, the optional fax multi line must be
installed.
%
Connect a modular cable connected to the phone line to a specified connector.
!
Detail
For the connector location for cable connection, refer to the User manual – Copy Operations.
4-4
Registration of basic information
bizhub C353/C253/C203 (FE2)
Advertisement
Table of Contents
Troubleshooting
