Receiving Data (G3: When The External Phone Is Not Connect); Auto Rx (Fax Only) - Konica Minolta bizhub C203 Operation Manual
Network scanner operations / fax operations / network fax operations
Hide thumbs
Also See for bizhub C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
Receiving data (G3/IP/I-FAX)
6
Receiving data (G3/IP/I-FAX)
6.1
Receiving data (G3: When the external phone is not connect)
6.1.1
Auto RX (fax only)
%
Specify this function for using the line as a dedicated line for fax transmission.
–
Data reception automatically starts after the ringing signal has been detected as many times as
specified.
–
During receiving operation, a "Receiving" message appears in the message display field of the
screen.
When the machine is in fax-only mode, the following settings are assumed.
-
External phone: Not connected.
-
Line Parameter Setting - Receive Mode: [Auto RX] is specified.
Note
For details on setting the line parameter, refer to "Fax Settings - Line Parameter Setting" on page 10-22.
!
Detail
To enable auto reception, set the receiving method to "Auto RX" in the Line Parameter Setting screen
in the Utility mode.
bizhub C353/C253/C203 (FE2)
Incoming
Reception starts automatically
Receive
original
6
6-3
Advertisement
Table of Contents
Troubleshooting
