For Windows Vista - Konica Minolta bizhub C203 Operation Manual
Network scanner operations / fax operations / network fax operations
Hide thumbs
Also See for bizhub C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
11
For Windows Vista
In Windows Vista, printers on the network can be located and installed.
Note
When installing Windows Vista, administrator permissions are required.
Printers will be found during installation. Connect this machine to the network, and then turn on the
power. For details on setting network, refer to the User manual – Network Administrator.
1
Insert the printer driver DVD into the computer's DVD drive.
2
Click the [Start] button, and then click "Control Panel".
3
From "Hardware and Sound", click "Printer".
–
If Control Panel is displayed with Classic View, double-click "Printers".
The Printers window appears.
4
Click "Add a printer" from the toolbar.
The Add Printer window appears.
5
Click "Add a local printer".
The Select a Printer Port dialog box appears.
6
Click "Create a new port", and select "Standard TCP/IP Port".
7
Click the [Next] button.
8
Select "TCP/IP Device", and then enter the IP address.
–
When both LPR and Port9100 are enabled for this machine, the printer driver and the machine is
connected with LPR.
9
Click the [Next] button.
–
If the Additional Port Information Required dialog box appears, go to step 10.
–
If the Install the printer driver dialog box appears, go to step 13.
10
Select "Custom", and then click the [Settings] button.
11
Change the settings according to the port, and then click the [OK] button.
–
For an LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
–
For a Port9100 connection, select "RAW", and then enter the RAW port number (9100 at default) in
the "Port Number" box.
–
The information entered here is case-sensitive.
12
Click the [Next] button.
The Install the printer driver dialog box appears.
13
Click the [Have Disk] button.
14
Click the [Browse] button.
15
Specify the desired folder on the DVD that contains the fax driver, and then click the [Open] button.
–
Select the specified folder according to the printer driver to be used, the operating system, and the
language.
16
Click the [OK] button.
The "Printers" list appears.
17
Click the [Next] button.
11-10
Fax Driver
bizhub C353/C253/C203 (FE2)
Advertisement
Table of Contents
Troubleshooting
