Communication Settings; Line Settings (G3); Overseas Tx; Ecm Off - Konica Minolta BIZHUB C203 User Manual

Network Scan/Fax/Network Fax Operations
6.12
6.12.1
bizhub C353/C253/C203 (FE2)
Downloaded From ManualsPrinter.com Manuals

Communication Settings

Line Settings (G3)

% Specify settings for a fax transmission line.

Overseas TX

% To send a fax to an area under a poor state of communications, specify a slow transmission speed.
!
Detail
This function cannot be used together with the following functions.
Polling TX
Polling RX
Bulletin

ECM OFF

% Cancel ECM mode to send data.
– The ECM mode is an error resend method of communication defined by the ITU-T (International
Telecommunication Union). As faxes equipped with the ECM mode communicate by checking if the
sent data has an error, they can prevent image blurring by the noise on the phone line. When there
are a lot of noises, communication time may be slightly longer than it is when "ECM OFF" is
selected. This machine automatically returns to the ECM ON status when it completes transmission.
!
Detail
Data is sent in the ECM mode unless ECM OFF is selected for this machine.
This function cannot be used together with the following functions.
Polling RX
Polling TX
V. 34 OFF
Bulletin Registration
Bulletin Polling RX
6
6-89