Information Before Saving Documents; Transmission Functions; Function Type; Precautions For Using Fax Function (G3) - Konica Minolta bizhub C203 Operation Manual
Network scanner operations / fax operations / network fax operations
Hide thumbs
Also See for bizhub C203:
- Service manual (1028 pages) ,
- Copy operations (604 pages) ,
- User manual (534 pages)
Table of Contents
Advertisement
Before using Network Scan/Fax/Network Fax functions
2
Before using Network Scan/Fax/Network Fax functions
2.1
Information before saving documents
2.1.1
Transmission functions
Function type
This machine can send and receive scanned images over the network or telephone line. This user manual
contains descriptions of the following functions.
Function type
Network Scan functions
Fax function
Network Fax function
Reminder
When turning off the [main power switch] and turning it on again, wait for 10 seconds or longer after
power-off, and then turn on the power again. The machine may not operate correctly if it is turned on
immediately after being turned off.
Precautions for using fax function (G3)
This machine cannot send/receive faxes in color.
The telephone line types which can be connected to this machine are as follows:
-
Subscribed telephone line (Including fax network)
-
PBX (two-wire private branch exchange)
Check the telephone line for the following:
-
You cannot connect a business phone as an external telephone.
-
If a digital dedicated line is multiplexed in an enterprise network, fax transmission speed may be limited,
or the Super G3 fax may not be available.
With the factory default settings, a communication error occurs at rare conditions. This is caused by the
multiplexed device being set to the lowest possible band for voice transmission. These limitations vary
depending on network configurations. For details, contact your network administrator.
Precautions for using network fax
The following conditions are required to use the network fax function.
-
The machine is connected to the network. (required)
The machine can be used in a TCP/IP network connection. First, connect the cable for connecting to the
network.
!
Detail
For details, refer to "Network connection and settings" on page 4-3. To use this machine on a network,
settings such as the IP address of the machine must be specified. For details, refer to the User manual
– Network Administrator.
bizhub C353/C253/C203 (FE2)
Options
•
Scan to E-Mail
•
FTP TX
•
SMB TX
•
Save in User Box
•
WebDAV TX
•
Web Service
•
G3 fax transmission/reception
•
Polling
•
Internet fax (I-FAX)
•
IP Address Fax
2
2-3
Advertisement
Table of Contents
Troubleshooting
