Table of Contents
Advertisement
Faxing
Darkness
This option adjusts how light or dark your faxes will turn out in relation to the original document.
Color
This option enables or disables color in faxing.
Page Setup
This option lets you change the Sides (Duplex), Orientation, and Binding.
•
Sides (Duplex)— Specifies if the original document is simplex (printed on one page) or duplex (printed on both
sides). This also identifies what needs to be scanned for inclusion in the fax.
•
Orientation— Specifies the orientation of the original document, and then changes Sides and Binding to match the
orientation.
•
Binding— Specifies if the original document is bound on the long‑edge or short‑edge side.
Scan Preview
This option displays the first page of the image before it is included in the fax. When the first page is scanned, the
scanning is paused and a preview image appears.
Delayed Send
This lets you send a fax at a later time or date.
1
Set up your fax.
2
From the home screen, navigate to:
Delayed Send > enter the date and time you want to send your fax > Done
Note: If the printer is turned off when the delayed fax is scheduled to be sent, then the fax is sent the next time the
printer is turned on.
This setting can be especially useful in sending information to fax lines that are not readily available during certain
hours, or when transmission times are cheaper.
Using the advanced options
These options, among other things, allow you to customize advanced imaging settings, combine multiple jobs into one,
and clean the edges of a document.
108
Advertisement
Table of Contents
