Table of Contents
Advertisement
Understanding the printer menus
Use
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Print Settings
Copies
1–999
Paper Source
Tray [x]
MP Feeder
Manual Paper
Manual Envelope
Color
Color
Black only
Collate
On [1,2,1,2,1,2]
Off [1,1,1,2,2,2]
Sides (Duplex)
1 sided
2 sided
To
Specify the contrast of the scanned image.
Note: Best for content is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness on a scanned image.
Note: 3 is the factory default setting.
Specify warm or cool outputs. Cool values generate a bluer output than the default
while warm values generate a redder output than the default.
Note: 0 is the factory default setting.
Specify a default number of copies for each print job.
Note: 1 is the factory default setting.
Set a default paper source for all print jobs.
Note: Tray 1 is the factory default setting.
Specify whether to print the document in color.
Note: Color is the factory default setting.
Stack the pages of a print job in sequence when printing multiple copies.
Note: On is the factory default setting.
Enable two‑sided printing for incoming print jobs.
Note: 1 sided is the factory default setting.
176
Advertisement
Table of Contents
