Table of Contents
Advertisement
Scanning
Resolution
This option adjusts the output quality of your file. Increasing the image resolution increases the file size and the time
needed to scan your original document. Image resolution can be decreased to reduce the file size.
Color
This option enables or disables color for the scanned image.
Content
This option lets you specify the content type and source of the original document.
Choose content type from Text, Text/Photo, Photo, or Graphics.
•
Text—Use when the content of the original document is mostly text or line art.
•
Graphics—Use when the original document is mostly business‑type graphics such as pie charts, bar charts, and
animations.
•
Text/Photo—Use when the original document is a mixture of text, graphics, and photos.
•
Photo—Use when the original document is mostly a photo or an image.
Choose content source from Color Laser, Black/White Laser, Inkjet, Photo/Film, Magazine, Newspaper, Press, or Other.
•
Color Laser—Use when the original document was printed using a color laser printer.
•
Black/White Laser—Use when the original document was printed using a mono laser printer.
•
Inkjet—Use when the original document was printed using an inkjet printer.
•
Photo/Film—Use when the original document is a photo from film.
•
Magazine—Use when the original document is from a magazine.
•
Newspaper—Use when the original document is from a newspaper.
•
Press—Use when the original document was printed using a printing press.
•
Other—Use when the original document was printed using an alternate or unknown printer.
Darkness
This option adjusts how light or dark your scanned documents will turn out in relation to the original document.
Page Setup
This option lets you change the Sides (Duplex), Orientation, and Binding.
•
Sides (Duplex)— Use this to specify if the original document is simplex (printed on one page) or duplex (printed on
both sides). This also identifies what needs to be scanned for inclusion in the e-mail.
•
Orientation— Use this to specify the orientation of the original document, and then change Sides and Binding to
match the orientation.
•
Binding— Use this to specify if the original document is bound on the long‑edge or short‑edge of the page.
116
Advertisement
Table of Contents
