Z57St24 / Z57St36 Horizontal Snorkel Terminations Mqrb4436 / Mqrb5143 - Kingsman Marquis Infinite MQRB4436 Installation Instructions Manual

Z57ST24 / Z57ST36
Two snorkel terminations are available for MQRB4436 / MQRB5143 If a vertical rise is necessary on the exterior side of a
building:
Z57ST24 (24" Tall, 14-1/2" Center to Center)
Follow standard horizontal venting installation procedures.
window well is recommended with adequate and proper drainage as per local
prevent water from entering the Snorkel Termination. Do not enclose the Snorkel within a wall or other type of enclosure
and do not back fill. Ensure that grade level slopes away from the building.
Maintain All Clearances,
including proper rise and run.
 A safety cage (Z57STSC) is also available.
Place safety cage over snorkel and mount with [4] DT screws (supplied with safety cage).
Horizontal Snorkel Terminations
-FOR INFINITE SERIES II MODELS ONLY-
Ensure adequate drainage.
-FOLLOW ALL LOCAL CODES-
Z57ST36 (36" Tall, 26-1/2" Center to Center)
If the Snorkel Termination is to be located below grade, a
codes. Leave 2" clearance below snorkel
Follow all local codes.
MQRB4436 / MQRB5143
to
86