Table of Contents
Advertisement
Switching Temporarily to a Program Type of
Your Choice
The Enhanced Other Networks function allows the unit to
switch temporarily to a broadcast program of your choice
(TA, NEWS, and INFO) from a different station.
• The function only works when you are listening to a preset
FM RDS stations providing the data.
To activate the Enhanced Other Networks function
REMEMBER you must preset FM RDS stations to use the
function. If not yet done, see page 11.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
On the remote control ONLY:
1
Press PTY/EON until "EON" and
"SELECT" alternately appear on
the display.
• Each time you press the button, RDS operation mode
changes as follows:
PTY SELECT
(See page 12.)
2
Press ¢ or 4 until the
data type you want appears
on the display.
The selected data type indicator (TA,
NEWS, and INFO) also flashes.
• Each time you press the button, the data type indication
changes as follows:
TA
TA:
Traffic announcement
NEWS: News
INFO: Program the purpose of which is to impart
advice in the widest sense.
OFF:
The function is canceled. The data type
indicator (TA, NEWS, and INFO) goes off.
3
Press PTY/EON once again.
The data type indicator stops flashing and
remains lit.
Now, the function is activated. See "How the
Enhanced Other Networks function actually works."
EON SELECT
Canceled
RDSEON TA
NEWS
INFO
OFF
(Canceled)
How the Enhanced Other Networks function actually
works:
CASE 1
If there is no station broadcasting the program you
have selected
The unit continues tuning in the current station.
When a station starts broadcasting the program you have
selected, the unit automatically switches to the station. The
indicator of received PTY code starts flashing.
When the program is over, the unit goes back to the
previously tuned station, but the function still remains
activated.
PTY
CASE 2
/EON
If there is a station broadcasting the program you have
selected
The unit tunes in the program. The indicator of received
PTY code starts flashing.
When the program is over, the unit goes back to the
previously tuned station, but the function still remains
activated.
CASE 3
If the FM station you are listening to is broadcasting
the program you have selected
The unit continues to receive the station but the indicator
of received PTY code starts flashing.
When the program is over, the indicator of received PTY
code stops flashing and remains lit, but the function still
remains activated.
More about the Enhanced Other Networks function
• The data sent from some stations may not be compatible with this
unit and also some stations may not include Enhanced Other
Networks data. In this case, the function may not work correctly.
• While listening to a program tuned into by the function, the
station does not change even if another network station starts
broadcasting a program of the same data.
• The function is canceled when you change the source to CD,
PTY
TAPE or AUX, while it is temporarily canceled when you change
/EON
the source to AM (MW).
• This function is also canceled when you turn off the unit.
– 13 –
«
«
«
«
Hide quick links:
Advertisement
Table of Contents
