Copying Mixer Settings - Roland V-Drums TD-20X Owner's Manual

4.
Press the [EXIT] or [FADER] button to return to the
"DRUM KIT" screen.
After pressing the [EXIT] or [FADER] button, the values
for the GROUP FADERS sliders may not reflect the actual
volume of the sound assigned to that fader. Be sure to
move the faders a bit before making your setting.

Copying Mixer Settings

The drum kit mixer's "VOLUME" (volume of each pad) and
"PAN" (stereo position of each pad) settings can be copied to
another drum kit in a single operation. You can also copy
from a drum kit in preset memory or a CompactFlash card.
If you're copying from user memory, you can exchange the
copy-source and copy-destination settings.
Be aware that when you execute the copy, the contents
of the copy-destination will be overwritten.
1.
Press the [COPY] button.
The [COPY] button will light, and the "COPY A" screen will
appear.
If a CompactFlash card (p. 91) is inserted in the CompactFlash
card slot, the CompactFlash indicator will also light.
2.
Press the [F5 (A<>B<>C)] button to access the
"COPY B" screen.
fig.03-009-copy-b.eps_70
3.
Press the [F1 (VOLUME)] or [F2 (PAN)] button to
select the settings that you want to copy.
(Example: When [F1 (VOLUME)] is selected)
fig.03-010-copy-vol.eps_70
Copy source
Copy destination
The screen above can be accessed from the VOLUME or
PAN setting screen (p. 56) by pressing the [COPY]
button while you hold down the [SHIFT] button.
4.
Use the [F1]–[F3] buttons to select the copy-source.
Function button
Copy from user memory.
Exchanging the copy-source and copy-
[F1 (USER)]
destination is possible only if the copy-source
is user memory.
Copy from preset memory.
You can choose from TDW-20's preset data or
[F2 (PRESET)]
TD-20 preset data. Select this if you want to
return to the factory-set kit settings.
Copy from backup data saved on a
[F3 (CARD)]
CompactFlash card.
5.
Use the [CURSOR], [-] [+] buttons, and the [VALUE]
dial to specify the copy-source and copy-
destination.
If you selected [F2 (PRESET)] in step 4, specify whether you're
copying from TD-20 or from TDW-20.
If you selected [F3 (CARD)] in step 4, select the copy-source
backup number.
6.
Press the [F4 (EXCHNG)] or [F5 (COPY)] button.
If you selected [F1 (USER)] in step 4, you can exchange the
copy-source and copy-destination by pressing the [F4
(EXCHNG)] button.
Press the [F5 (COPY)] button to execute the copy.
A confirmation message will appear.
(Example: Copying mixer settings from a CompactFlash card)
fig.03-011-copy-vol-conf.eps_70
If you decide to cancel the copy or exchange, press the [F1
(CANCEL)] button.
7.
Press the [F5 (EXECUTE)] button to execute.
Chapter 3. Mixer Settings
57