Percussion Part Settings [F3 (Perc)]; Percussion Set Settings - Roland V-Drums TD-20X Owner's Manual

Percussion Part Settings [F3 (PERC)]

Choosing a Percussion Set
An assembled group of different percussion instruments is
called a "percussion set." Since each note number has been
assigned a different percussion instrument, a multiple
number of instruments can be played at one time.
1.
In the "PATTERN PART" screen (p. 71), press the [F3
(PERC)] button.
The "PERCUSSION PART" screen appears.
fig.05-013-percset.eps_70
2.
Use the [-] [+] buttons or the [VALUE] dial to select
the percussion set.
About the Percussion Sets
The TD-20X features eight percussion sets.
You can select which percussion set is to be used in
each pattern in the "PERCUSSION PART" screen.
Pattern
Pattern 1
Pattern 2
Pattern 151
Pattern 152
Pattern 250
Changing a percussion set's instrument settings
simultaneously changes the percussion instruments in
patterns using the same percussion sets.
The preset patterns use percussion sets 1–5. If you
change the percussion set settings, it is
recommended that you first copy the percussion
set you want to change to percussion set 6 or other
percussion set, then change the settings in the
copy.
Percussion Set
Percussion Set 1
Percussion Set 2
Percussion Set 3
Percussion Set 4
Percussion Set 5
Percussion Set 6
Percussion Set 7
Percussion Set 8
Chapter 5. Playing Patterns—Sequencer

Percussion Set Settings

1.
In the "PERCUSSION PART" screen, press the [F5
(EDIT)] button.
The "PERCUSSION SET EDIT" screen appears.
fig.05-014-percinst.eps_70
2.
Make settings of the percussion set.
3.
When finished, press the [EXIT] button to return to
the "PERCUSSION PART" screen.
Selecting a percussion instrument
Select an instrument for each note number.
1.
In the "PERCUSSION SET EDIT" screen, use the
[CURSOR (up/down)] buttons to select the note
number.
2.
Use the [VALUE] dial or the [-] [+] buttons to select
the instrument.
You can listen the sound of instrument by pressing the
[PREVIEW] button.
73