Assigning A Function To A Footswitch Or Pad [F3 (Control)]; Assigning A Function To A Footswitch [F1 (Foot Sw)] - Roland V-Drums TD-20X Owner's Manual

Chapter 9. Settings for the Entire TD-20X [SETUP]
Assigning a Function to a
Footswitch or Pad
[F3 (CONTROL)]
Assigning a Function to a Footswitch
[F1 (FOOT SW)]
You can use a special cable (PCS-31: sold separately) to
connect two footswitches (BOSS FS-5U: sold separately), and
assign the footswitches to various functions such as
switching between drum kits or playing patterns.
fig.FootSw.e
Footswitch
FS-5U x 2 (PCS-31)
DP-2
o: Functions
1.
In the "SETUP" screen (p. 108), press the [F3
(CONTROL)] button.
2.
Press the [F1 (FOOT SW)] button.
The "FOOT SWITCH" screen appears.
fig.09-006-foot.eps_70
110
PCS-31
(sold separately)
FS-5U
SW1 SW2
o (red plug) o (white plug)
– o
–: Does not function
3.
Use the [-] [+] buttons or the [VALUE] dial to select
the function for footswitches.
When setting to "USER," use the [CURSOR] buttons to move
the cursor to "SW1" or "SW2."
Function
SW1
KIT SELECT
SW2
SW1
CHAIN
SELECT
SW2
SW1
PATTERN
SELECT
SW2
SW1
PATTERN
PLAY
SW2
FIXED HH/
STRAINER
SW1
When this
function is
selected, the
"FIX HH
STNR" icon
SW2
will appear in
the "DRUM
KIT" screen.
SW1
AMB/MFX
SW
SW2
USER
Indication Description
Calls up the previous
KIT# DEC
kit.
KIT# INC Calls up the next kit.
Calls up the previous
CHAIN# DEC
drum kit chain.
Calls up the next
CHAIN# INC
drum kit chain.
Calls up the previous
PTN# DEC
pattern.
Calls up the next
PTN# INC
pattern.
Calls up the next
PTN# INC
pattern.
Plays back/stops the
STOP/PLAY
pattern.
Specifies whether
the hi-hat's "Fixed Hi-
FIXED HH Hat" setting (p. 50)
will be set to "FIXED
2."
Specifies whether
the snare's "Strainer
STRAINER
Adj." setting (p. 49)
will be turned "OFF."
Turns the ambience
AMBIENCE
effect switch (p. 61)
SW
on/off.
Turns the multi-
MFX SW effect switch (p. 62)
on/off.
Selects the function assigned to SW1
and SW2.