Eliminate Crosstalk Between Pads [F4 (Xtalk)] - Roland V-Drums TD-20X Owner's Manual

Eliminate Crosstalk Between
Pads [F4 (XTALK)]
When two pads are mounted on the same stand, hitting one
pad may trigger the sound from another pad unintentionally.
(This is called "crosstalk.") Eliminate this by adjusting Xtalk
Cancel on the pad that is sounding inadvertently.
In some cases, you can prevent crosstalk between two
pads by increasing the distance between them.
1.
Press the [TRIGGER] button.
The [TRIGGER] button lights.
2.
Press the [F4 (XTALK)] button.
If [F4 (XTALK)] is not shown, press the [F1 (BANK)] button
once to access the "TRIGGER BANK" screen.
3.
Use the [F1]–[F3] buttons to select the parameter.
fig.08-013-xtalk.eps_70
The graph in the right side of the screen is a "velocity
monitor" that shows the force (velocity) of your strike. It
shows the velocities of the sixteen most recent strikes.
4.
Select the pad for which you want to make settings.
Strike the pad, or use the TRIG SELECT buttons to select it.
You can also use the [CURSOR] buttons to select the pad.
Chapter 8. Trigger Settings for Each Pad [TRIGGER]
5.
Use the [-] [+] buttons or the [VALUE] dial to adjust
the setting.
Parameter Value
[F1 (XTALK)] button
5–80
XTALK CANCEL
OFF
[F2 (MOUNT)] button
Select the pad mount type here.
SEPARATE
MOUNT TYPE
PAD
CYMBAL
[F3 (GROUP)] button
XTALK GROUP 1–8
6.
When you're finished, press the [EXIT] button to
return to the "DRUM KIT" screen.
Crosstalk example: If you hit the snare pad
and the tom 1 also sounds
Set the snare and tom 1 to the same group.
Raise the "XTALK CANCEL" for the pad being used for
the tom 1. The tom 1 pad will be less prone to receive
crosstalk from other pads.
With a setting "OFF," crosstalk prevention will not work.
If the value is set too high, and two pads are played
simultaneously, the one that is struck less forcefully
may not sound. Be careful and set this parameter
to the minimum value required to prevent
crosstalk.
Description
Strength of crosstalk
cancelling (steps of 5)
Crosstalk cancellation will be
turned off
Set independently
Using a pad mount
Using a cymbal mount
Crosstalk Cancel affects the
pads set to the same number.
101