Settings For The Vh-11; Settings For The Fd-8 - Roland V-Drums TD-20X Owner's Manual

Chapter 8. Trigger Settings for Each Pad [TRIGGER]

Settings for the VH-11

• When Hi-Hat Type is set to "VH11/FD"
Parameter Value
Foot Splash -10– +10
Sens
(Initial Value: +8)
90, 127
CC Max
(Initial Value: 90)
NORMAL, HIGH
CC
(Initial Value:
Resolution
NORMAL)
Adjusting the offset of VH-11
If you're using the VH-11 V-hi-hat, execute the offset
adjustment from the TD-20X after making connections.
This adjustment is required in order to correctly detect open,
close, and pedal operations.
1.
Connect the VH-11 and TD-20X.
2.
After making the hi-hat settings, release your foot
from the pedal, and while keeping your foot off the
pedal, turn on the power to the TD-20X.
3.
Loosen the clutch screw and let the hi-hat rest
naturally on the motion sensor unit.
4.
Press the [TRIGGER] button.
5.
Press the [F1 (BANK)] button.
The [TRIGGER] button lights, and the "TRIGGER BANK" screen
appears.
6.
Set the trigger type for hi-hat to "VH11" (p. 96).
7.
Press the [F3 (HI-HAT)] button.
The "TRIGGER HI-HAT" screen appears.
100
Description
Amount of how easy to make
the Foot Splash
Amount of Control Change
that is transmitted in stepping
the pedal down completely.
Amount of Data Resolution
that is transmitted from Hi-
Hat Pedal.
When you control the pitch
by Hi-Hat Pedal (p. 52), the
pitch can be changed
smoothly if you set "High."
8.
Set the TD-20X's parameters as described below.
Parameter
Hi-Hat Type
Foot Splash Sens
CC Max
CC Resolution
9.
While reading the meter displayed on the right side
of the TD-20X's screen, adjust the offset with the
VH-11's VH offset adjustment screw.
Adjust the offset so that the black
fig.08-010-vh11-offset-2.eps_70
For detailed descriptions regarding the VH-11,
instructions on connections, and other information,
refer to the VH-11 Owner's Manual.

Settings for the FD-8

• When Hi-Hat Type is set to "VH11/FD"
Parameter Value
Foot Splash -10– +10
Sens
(Initial Value: +8)
90, 127
CC Max
(Initial Value: 90)
NORMAL, HIGH
CC
(Initial Value:
Resolution
NORMAL)
Value
VH11/FD
+8
90
NORMAL
appear in the meter.
Description
Amount of how easy to make
the Foot Splash
Amount of Control Change
that is transmitted in stepping
the pedal down completely.
Amount of Data Resolution
that is transmitted from Hi-
Hat Pedal.
When you control the pitch
by Hi-Hat Pedal (p. 52), the
pitch can be changed
smoothly if you set "High."