Roland V-Drums TD-20X Owner's Manual page 75

Naming a percussion set [F3 (NAME)]
Each percussion set can be named (up to 12 characters).
1.
In the "PERCUSSION SET EDIT" screen (p. 73), press
the [F3 (NAME)] button.
The "PERCUSSION SET NAME" screen appears.
fig.05-017-percname.eps_70
Function button
A blank space is inserted at the cursor
[F1 (INSERT)]
position.
[F2 (DELETE)] Character at the cursor position is deleted.
Character at cursor position is replaced by
[F3 (SPACE)]
a blank space.
Character at the cursor position changes
[F4 (CHAR)] between uppercase/lowercase alphabet,
or numbers and symbols.
2.
Use the [CURSOR (left/right)] buttons to move the
cursor to the character to be changed.
3.
Use the [VALUE] dial, the [-] [+], or [CURSOR (up/
down)] buttons to change the character.
4.
Press the [EXIT] button to return to the
"PERCUSSION SET EDIT" screen.
Chapter 5. Playing Patterns—Sequencer
Copying a percussion set
You can copy a percussion set from preset memory or from a
CompactFlash card.
For user memory, you can rearrange the data by exchanging
the copy-source and copy-destination percussion sets.
Be aware that when you execute the copy, the contents
of the copy-destination will be overwritten.
1.
Press the [COPY] button.
The [COPY] button will light, and the "COPY A" screen will
appear (p. 91).
If a CompactFlash card (p. 91) is inserted in the CompactFlash
card slot, the CompactFlash indicator will also light.
2.
Press the [F5 (A<>B<>C)] button twice to access the
"COPY C" screen.
fig.05-018-copy-c.eps_70
3.
Press the [F3 (PERC)] button.
fig.05-019-perc-copy.eps_70
Copy source
Copy destination
4.
Use the [F1]–[F3] buttons to select the copy-source.
Function button
Copy from user memory.
Exchanging the copy-source and copy-
[F1 (USER)]
destination is possible only if the copy-source
is user memory.
Copy from preset memory.
[F2 (PRESET)] Choose this if you want to return to the factory
settings.
Copy from backup data saved on a
[F3 (CARD)]
CompactFlash card.
75