Naming A Trigger Bank [F5 (Name)]; Copying A Trigger Bank - Roland V-Drums TD-20X Owner's Manual

Chapter 8. Trigger Settings for Each Pad [TRIGGER]
Naming a Trigger Bank
[F5 (Name)]
Each trigger bank can be named (up to 12 characters).
1.
In the "TRIGGER BANK" screen (p. 96), select the
trigger bank you want to name.
2.
Press the [F5 (ADVANCE)] button.
3.
Press the [F5 (NAME)] button.
The "TRIGGER BANK NAME" screen appears.
fig.08-020-name.eps_70
Function button
A blank space is inserted at the cursor
[F1 (INSERT)]
position.
[F2 (DELETE)] Character at the cursor position is deleted.
Character at the cursor position is
[F3 (SPACE)]
replaced by a blank space.
Character at the cursor position changes
[F4 (CHAR)] between uppercase/lowercase alphabet,
or numbers and symbols.
4.
the [CURSOR (left/right)] buttons to move the
cursor to the character to be changed.
5.
Use the [VALUE] dial, the [-] [+], or [CURSOR (up/
down)] buttons to change the character.
6.
When finished, press the [EXIT] button.
106

Copying a Trigger Bank

You can copy a trigger bank from preset memory or from a
CompactFlash card.
For user memory, you can rearrange the data by exchanging
the copy-source and copy-destination trigger banks.
Be aware that when you execute the copy, the contents
of the copy-destination will be overwritten.
1.
Press the [COPY] button.
The [COPY] button will light, and the "COPY A" screen will
appear.
If a CompactFlash card (p. 91) is inserted in the CompactFlash
card slot, the CompactFlash indicator will also light.
2.
Press the [F5 (A<>B<>C)] button twice to access the
"COPY C" screen.
fig.08-21-copy-c.eps_70
3.
Press the [F1 (TRIG)] button.
fig.08-22-copy.eps_70
Copy source
Copy destination
4.
Use the [F1]–[F3] buttons to select the copy-source.
Function button
Copy from user memory.
Exchanging the copy-source and copy-
[F1 (USER)]
destination is possible only if the copy-source
is user memory.
Copy from preset memory.
[F2 (PRESET)] Choose this if you want to return to the factory
settings.
Copy from backup data saved on a
[F3 (CARD)]
CompactFlash card.