Roland V-Drums TD-20X Owner's Manual page 51

CRASH/SPLASH/CHINA/STACKED CYMBAL/RIDE
fig.02-023-cym-f1.eps_70
Parameter Value
[F1 (SIZE)] button
Size 1"–40"
[F2 (SIZZLE)] button
OFF, RIVET,
Sizzle Type
CHAIN, BEADS
Sizzle Amount -3–+3
[F3 (SUSTAIN)] button
Sustain -31–+31
[F4 (MIC)] button
OUTSIDE2–1,
Mic Position STANDARD,
INSIDE1–2
Description
Cymbal diameter
Type of sizzle
Amount of sizzle
Length of sustain
Tonal change caused by
microphone position
Chapter 2. Instrument Settings [INST]
Instruments for which V-EDIT is not available
Electronic instruments (Dynamic Pitch Bend)
"Dynamic Pitch Bend" is a function that you can use with the
electronic instruments that were added on the TDW-20.
You can make the following settings when you've selected
the "SNARE ELEC," KICK ELEC," or "TOM ELEC" instrument
from the "EXP" instrument group.
If "Dynamic Pitch Bend" is on, you'll be able to change the
pitch by varying the force (velocity) with which you strike the
pad.
fig.02-027-dynapitch.eps_70
Parameter Value
[F1 (PITCH)] button
Basic Pitch -480 – +480
Dynamic Bend OFF, ON
Bend Depth -24 – +24
Bend Time -31 – +31
[F2 (DECAY)] button
Decay Time -31 – +31
Depending on the "Basic Pitch" setting of the
instrument, there may be cases in which raising (or
lowering) a value does not produce further change.
Other instruments
fig.02-028-decay.eps_70
Parameter Value
Pitch -480–+480
Decay Time -31–+31
Description
Pitch
Turns dynamic pitch bend
on/off
Amount of pitch change
controlled by velocity
Time over which currently
controlled pitch change
will occur
Length of the decay
Description
Pitch
Duration of the sound
(decay time)
51