Advertisement
Controls
Cold & Ambient Models
Electrical On/Of switch - At upper rear of machine. Switches on Cooling Operation.
Cold Thermostat - At rear of machine. On Classic models and inside the machine, next to the Chill Tank, on DC
Models.
Factory set to:
+C
NB: Turn clockwise to decrease water temperature
Ambient Tap
Cold Tap
Green LED (Top)
Yellow LED (Bottom)
Hot & Cold Machines:
Electrical On/Off Switches
10A Fuse
Hot Tap
Cold Tap
Green LED (Top)
Yellow LED (Middle)
Red LED (Bottom)
Hot Tank Overheat Reset Button
-C
Press downwards to dispense Ambient water
Press downwards to dispense Cold Water
Colours to show Cooling Operation is switched on
Colours to show when compressor is operating
At upper rear of machine
Cold - Switches on Cooling Operation
Hot - Switches on Heating Operation
At upper rear of machine
Lift Safety Tag and press downwards to dispense Hot Water
Press downwards to dispense Cold Water
Colours to show Cooling Operation is switched on
Shows when heating mode is switched on
Colours to show when main heater is operating (i.e. Off when water is at
temperature)
On sensor on side of Hot Tank (Press to operate if required. Ensure
electrical power is disconnected before doing so).
628 & 698 Models
6
Advertisement
