Advertisement
628 & 698 Models
The Waste Kit
• Remove Filter Bracket from base of machine and place container inside
• Remove top lid. This will allow access to the rear of the drip tray area.
• Connect the 2 lengths of silicone tube together using the 90 degree elbow
• Connect the shorter length to stem on the rear of the drip tray area.
• Feed the tube to the back of the machine where it can be directed into the base.
Connect to the lid of the container.
• Remove the bung from the stem of the drip tray and the machine can now be put into service.
18
Advertisement
