Page 1
User Guide T2/T2+ Tap systems Dispense Options Chilled Ambient Sparkling Contents Component/Feature Overview Operation Functions & Controls General Safety CO2 Bottle Installation Fault Finding NOTE: This booklet to be left with Borg & Overström appliance following installation...
Component/ Feature Overview T2 Tap - Major Components Contents: 1 no T2 Tap 1 no Top Plate with Control Panel 1 no Drip Tray 1 no 1.0m x 6mm Insulated Water Pipe 1 no Connector Cable 1 no Waste Drain Pipe...
Page 3
ProCore™ Undercounter - Major Components Contents: 1 no ProCore or ProCore+ Unit 1 no 2.0m Power Cord Set 1 no Co2 Regulator with Gauge & Connection tube* 1 no Ventilation Ducting Kit Top Panel Water Inlet Water Outlet Tap Connection CO2 Inlet Unit Carry Handle On/Off Switch...
Page 4
Front Panel Ventilation Chimney Easy-fit Ventilation Base...
Operation Tap Control Panel Sparkling Dispense Chilled Dispense Ambient Dispense Warning Symbol ‘eco’ Mode Symbol Basic Functions Dispensing from unit: Press and hold dispense icon and release to finish dispense ‘eco’ Mode: ‘eco’ mode symbol illuminates when unit is in ‘eco’ mode, to awaken unit press and hold any dispense icon. The Unit will activate ‘eco’...
General Safety General Safety - Always place the dispenser in its vertical position, on a surface which can capably support its weight. - During use this machine must remain in its upright position. - Adequate ventilation must be allowed for - we recommend using the supplied ventilation ducting kit.
Page 7
CO2 Bottle Installation - Sparkling Versions Only Unpack CO2 Regulator and fit Attach the regulator to the Connect the assembled CO2 elbow fitting to spigot outlet. disposable CO2 bottle, ensuring bottle and regulator to the CO2 the pressure relief vent is facing inlet using a ¼”...
Need help?
Do you have a question about the T2 and is the answer not in the manual?
Questions and answers