Multi-Color Power Led - NCR RealPOS 5953 User Manual

1-4 Chapter 1: Overview

Multi-Color Power LED

On the face of the USB DynaKey is a multi‐color power LED. The
status and condition indicated by the LED are shown as follows.
Status Condition
Green DynaKey power on
Orange* LCD in standby mode (or see note below)
Red FPGA reporting an error condition
Flashing DynaKey keypad in PC Setup mode
(red/green) (See Special Keypad mode in Installation)
Off DynaKey powered off
Note: The LED may also be orange for a few seconds on power‐up
before display is active.