NCR RealPOS 5953 User Manual page 28

3-4 Chapter 3: Hardware Installation
2. Connect the cables to the DynaKey.
•
Connect the terminal DVI cable to the DynaKey DVI connector.
•
Connect external USB devices to the DynaKey USB connectors
(optional).
•
Connect the terminal Powered USB cable to the DynaKey
Powered USB connector.
Note: As an option the DynaKey can be power from an
external power brick.
DVI
(Video In)
Powered USB Dual USB
(Data/Power In) (External)
Single USB
(External)
21141