Installing And Calibrating The Touch Screen; Installing The Driver - NCR RealPOS 5953 User Manual

3-14 Chapter 3: Hardware Installation

Installing and Calibrating the Touch Screen

Installing the Driver

Be sure to observe for the following Touch Screen calibration
guidelines:
•
Calibrate the touch screen as part of the installation process.
•
Recalibrate the touch screen when the system is installed at its final
location.
•
Recalibrate whenever the terminal is moved to a new location.
•
Recalibrate the touch screen anytime the system has been
disassembled for servicing.
•
Download the Calibration software from the NCR website.
http://www.ncr.com
a. At this site, select Support →
b. Under Related Items, Services; select Drivers and
Retail Support Files → Retail Platform
c. Download the Touch Driver.
Note: If you have a previous version of another touch screen driver
loaded on your system, you must completely remove it before
continuing with this installation process.
1. Extract the Hampshire driver installation files into to a working
directory on the host terminal.
2. Locate and run the TSHARC USB Setup.exe program.
3. Welcome screen > Next
4. License Agreement screen > Accept, Next
Patches →
Software → 5953.