DynaKey Cleaning Procedures
Cleaners/Solvents to Use
NCR keyboards are designed for general retail applications. These
products are resistant to spills and dust. However, these products are
not spill proof or dust proof.
To maintain proper keyboard operation, users should prevent water,
beverages, or cleaning agents from being introduced into the keyboard
during storage, operation, or cleaning.
To clean your keyboard, use the following procedures:
1. Disconnect the unit from the power outlet before cleaning.
2. Use a soft cloth dampened lightly with a mild non‐abrasive soap &
water solution or 70% Isopropyl Alcohol.
3. Gently wipe the subject area clean.
4. Wipe the damp areas dry. Make sure the glass and touch screen
edges are completely dry before using the unit.
5. Avoid getting any liquids inside the unit. If liquid does get inside,
have a qualified service technician check it before you power it on
again.
Use the following cleaner/solvents to clean the unit.
•
Mild Non‐Abrasive Soap and Water Solution
or
•
70% Isopropyl Alcohol
Chapter 6: Hardware Service 6-25