SetUsbKeyMatrix may be launched "by hand" using the Windows Start
> Run option, or any equivalent shortcut technique (desktop, quick‐
launch pad, menu). If started in this manner, the command line can
optionally contain strings of the form "keyword{= value}", where
keyword is one of the defined parameters, and value is an optional
numeric value to be applied to that key.
The following table gives the available command‐line parameters.
Command-line Parameters
Keyword
1
Value (Decimal numbers)
Close
Close any background session found
runtime
A number of seconds to remain resident,
waiting for additional devices to
initialize.
1
Keywords are not case sensitive, and may be abbreviated to 3 or more
characters.
Set USB Key Clicks Application
SetUsbKeyClick is a Windows application for the Desktop O/S versions
(Windows 98se, Windows 2000) that uses the NCRUsbKeyboardCtl
control to set keyclick tone parameters. The application operates as a
memory‐resident background process for a duration that may be
specified on the command line. If no duration is specified, the
application remains resident until terminated by user action. While
resident, the application receives device‐attachment notifications for
HID devices, and when these are received, invokes the
NCRUsbKeyboardCtl control to set key click tone parameters.
Chapter 4: Programming 4-15
Value
n/a
0 = indefinitely