Connecting The 5953 To A Pc - NCR RealPOS 5953 User Manual

3-20 Chapter 3: Hardware Installation

Connecting the 5953 to a PC

DVI
Powered USB
The 5953 can be connected to a regular PC using the Universal Switching
Power Supply kit, 5953‐K102. This kit is used when the PC does not
have a USB PlusPower connection but does have a standard USB
Type A connection and a DVI connection.
•
Connect the DVI cable to the DynaKey DVI and PC connectors.
•
Connect the USB cable to the DynaKey Powered USB connector on
the DynaKey and to a USB port on the PC.
•
Connect the Power Supply to the USB cable and to an AC outlet
using a standard power cord.
USB Cable
Power Supply
USB Port
(PC)
AC Power
21237