Installing the DynaKey
Mounting Options
Installing a Standard Remote Table Top USB DynaKey
(5964-K030)
This section discusses how to install the DynaKey hardware
configurations. See the terminal Hardware User's Guide for specific
procedures about how to connect the DynaKey to the host terminal.
•
5964‐K030 Standard Remote Table Top Base (G11)
•
5964‐K031 Standard Remote Table Top Base (CG1)
•
5953‐K023 Checkstand Mount
Each of the mounting options are discussed, followed by a section
titled Connecting the 5953 DynaKey to the Terminal, which describes the
cable connections.
1. Route the cables down through mount and out the back of the base.
Chapter 3: Hardware Installation
3-3
21140