Checking The Rear Wheel Drive Hub; Checking And Replacing The Rear Wheel Sprocket - Yamaha YZF-R6 Service Manual
Hide thumbs
Also See for YZF-R6:
- Owner's manual (133 pages) ,
- Owner's manual (108 pages) ,
- Owner's manual (116 pages)
Table of Contents
Advertisement
REAR WHEEL, BRAKE DISC, AND REAR WHEEL
SPROCKET
3. Measure:
S radial wheel runout
S lateral wheel runout
Refer to "FRONT WHEEL".
Over the specified limits ! Replace.
Max. radial wheel runout
1.0 mm
Max. lateral wheel runout
0.5 mm
EAS00567
CHECKING THE REAR WHEEL DRIVE HUB
1. Check:
S rear wheel drive hub 1
Cracks/damage ! Replace.
S rear wheel drive hub dampers 2
Damage/wear ! Replace.
EAS00568
CHECKING AND REPLACING THE REAR
WHEEL SPROCKET
1. Check:
S rear wheel sprocket
More than 1/4 tooth a wear ! Replace the
rear wheel sprocket.
Bent teeth ! Replace the rear wheel sprock-
et.
b Correct
1 Drive chain roller
2 Rear wheel sprocket
2. Replace:
S rear wheel sprocket
a. Remove the self-locking nuts and the rear
wheel sprocket.
b. Clean the rear wheel drive hub with a clean
cloth, especially the surfaces that contact the
sprocket.
c. Install the new rear wheel sprocket.
Rear wheel sprocket self-locking
nut
69 Nm (6.9 mSkg)
NOTE:
Tighten the self-locking nuts in stages and in a
crisscross pattern.
7-12
CHAS
Advertisement
Chapters
Table of Contents
Troubleshooting
