Yamaha YZF-R6 Service Manual page 326

FRONT FORK
3. Tighten:
S damper rod assembly bolt
NOTE:
While holding the damper rod with the damper
rod holder 2 , tighten the damper rod assembly
bolt.
Damper rod holder
90890-01425
4. Install:
S outer tube bushing 1
S washer 2
S oil seal 3
S oil seal clip 4
S dust seal 5
CAUTION:
Make sure that the numbered side of the oil
seal faces up.
NOTE:
S Before installing the oil seal, lubricate its lips
with lithium soap base grease.
S Lubricate the outer surface of the inner tube
with fork oil.
S Before installing the oil seal, cover the top of
the front fork leg with a plastic bag 6 to protect
the oil seal during installation.
5. Install:
S washer
S oil seal 1
(with the fork seal driver 2 )
Fork seal driver weight
90890-01367
Fork seal driver attachment
90890-01374
6. Install:
S oil seal clip 1
NOTE:
Adjust the oil seal clip so that it fits into the outer
tube's groove.
7-49
CHAS
1
40 Nm (4.0 mSkg)