Yamaha YZF-R6 Service Manual page 20

Tool No.
Oil filter wrench
90890-01426
This tool is needed to loosen or tighten the oil
filter cartridge.
Rod holder
90890-01434
This tool is used to support the damper ad-
justing rod.
Rod puller Rod puller
90890-01437 Rod puller attachment
Rod puller
attachment These tools are used to pull up the front fork
90890-01436 damper rod.
Fork spring compressor
90890-01441
This tool is used to disassemble or assemble
the front fork legs.
Fork seal driver Fork seal driver weight
90890-01376 Fork seal driver attachment
Fork seal driver
attachment This tool is used to install the front fork's oil
90890-01374 seal and dust seal.
Micrometer
90890-03008
This tool is used to measure the piston skirt
diameter.
Cylinder bore gauge (50~100mm)
90890-03017
This gauge is used to measure cylinder bore.
Vacuum gauge
Vacuum gauge
Vacuum gauge attachment
90890-03094
Valve gauge
attachment
This gauge is used to synchronize the carbu-
90890-03060
retors.
Compression Compression gauge
gauge Adapter
90890-03081
Adapter These tools are used to measure engine
90890-04136 compression.
Pocket tester
90890-03112
This tool is used to check the electrical sys-
tem.
Tool name/Function
1-9
SPECIAL TOOLS
GEN
INFO
Illustration