Installing The Swingarm; Installing The Drive Chain - Yamaha YZF-R6 Service Manual

SWINGARM AND DRIVE CHAIN
EAS00711

INSTALLING THE SWINGARM

1. Lubricate:
S bearings
S spacers
S dust covers
S pivot shaft
2. Install:
S swingarm
S pivot shaft
S washer
S pivot shaft adjust bolt 1
S pivot shaft nut
NOTE:
Use the pivot shaft wrench 2 to tighten the piv-
ot adjust bolt to finger tightness.
3. Install:
S rear shock absorber assembly
S rear wheel
Refer to "REAR SHOCK ABSORBER AS-
SEMBLY" and "REAR WHEEL".
4. Adjust:
S drive chain slack
Refer to "ADJUSTING THE DRIVE CHAIN
SLACK" in chapter 3.
EAS00713

INSTALLING THE DRIVE CHAIN

1. Lubricate:
S drive chain
2. Install:
S drive chain
(with the drive chain riveter)
7-75
CHAS
Recommended lubricant
Lithium soap base grease
95 Nm (9.5 mSkg)
Pivot shaft wrench:
90890-1471
Drive chain slack
40 X 50 mm