Special Tools - Yamaha YZF-R6 Service Manual

EB104000

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly.
Use only the appropriate special tools as this will help prevent damage caused by the use of inappropri-
ate tools or improvised techniques.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
Flywheel puller
Flywheel puller
Adapter
90890-01362
Adapter
This tool is used to remove the generator ro-
90890-04089
tor.
Sheave holder
90890-01701 This tool is used to hold the generator rotor
when removing or installing the generator ro-
tor bolt or pickup coil rotor bolt.
Piston pin puller
90890-01304
This tool is used to remove the piston pins.
Fuel level gauge
90890-01312
This tool is used to measure the fuel level in
the float chamber.
Radiator cap Radiator cap tester
tester Adapter
90890-01325
Adapter These tools are used to check the cooling
90890-01352 system.
Steering nut wrench
90890-01403
This tool is used to loosen or tighten the steer-
ing stem ring nuts.
Damper rod holder
90890-01425 This tool is used to hold the damper rod as-
sembly when loosening or tightening the
damper rod assembly bolt.
Pivot shaft wrench
90890-01471
This tool is used to loosen or tighten the pivot
adjust bolt and engine mount adjust bolt.
Tool name/Function
1-8
SPECIAL TOOLS
GEN
INFO
Illustration