Yamaha YZF-R6 Service Manual page 251

WATER PUMP
EAS00475
ASSEMBLING THE WATER PUMP
1. Install:
S bearing
oil seal 1
New
(into the water pump housing 2 )
NOTE:
S Before installing the oil seal, apply tap water or
coolant onto its outer surface.
S Install the oil seal with a socket that matches
its outside diameter.
2. Install:
S water pump seal 1
CAUTION:
Never lubricate the water pump seal surface
with oil or grease.
NOTE:
S Install the water pump seal with the special
tools.
S Before installing the water pump seal, apply
Yamaha bond No.1215 2 to the water pump
housing 3 .
Mechanical seal installer
90890-04078 4
Middle driven shaft bearing
driver 5
90890-04058 5
Yamaha bond No. 1215
90890-85505
A Push down.
3. Install:
S rubber damper 1
S rubber damper holder 2
NOTE:
Before installing the rubber damper, apply tap
water or coolant onto its outer surface.
5-16
COOL
New
New
New