Checking The Relay Arm And Connecting Arm; Installing The Rear Shock Absorber Assembly - Yamaha YZF-R6 Service Manual

REAR SHOCK ABSORBER ASSEMBLY
7-67
CHECKING THE RELAY ARM AND CON-
NECTING ARM
1. Check:
S relay arm 1
S connecting arm 2
Damage/wear ! Replace.
S bearings
S oil seals
Damage/pitting ! Replace.
S spacers
Damage/scratches ! Replace.
EAS00698
INSTALLING THE REAR SHOCK ABSORB-
ER ASSEMBLY
1. Lubricate:
S bearings
S oil seals
S spacers
Recommended lubricant
Lithium soap base grease
2. Install:
S connecting arm
S relay arm
S rear shock absorber assembly
NOTE:
When installing the rear shock absorber assem-
bly, lift up the swingarm.
3. Tighten:
S connecting-arm-to-frame nut
S relay-arm-to-connecting-arm nut
S relay-arm-to-swingarm nut
S rear shock absorber assembly lower nut
CHAS
40 Nm (4.0 mSkg)
40 Nm (4.0 mSkg)
40 Nm (4.0 mSkg)
40 Nm (4.0 mSkg)