A
B
FRONT AND REAR BRAKES
EAS00588
REMOVING THE FRONT BRAKE MASTER
CYLINDER
NOTE:
Before disassembling the front brake master
cylinder, drain the brake fluid from the entire
brake system.
1. Remove:
S union bolt 1
S copper washers 2
S brake hoses 3
S master cylinder holder 4
NOTE:
To collect any remaining brake fluid, place a
container under the master cylinder and the end
of the brake hose.
EAS00589
REMOVING THE REAR BRAKE MASTER
CYLINDER
1. Remove:
S union bolt 1
S copper washers 2
S brake hose 3
S button head bolts 4
NOTE:
To collect any remaining brake fluid, place a
container under the master cylinder and the end
of the brake hose.
EAS00593
CHECKING THE FRONT AND REAR BRAKE
MASTER CYLINDERS
The following procedure applies to both of the
brake master cylinders.
1. Check:
S brake master cylinder
Damage/scratches/wear ! Replace.
S brake fluid delivery passages
(brake master cylinder body)
Obstruction ! Blow out with compressed air.
A Front
B Rear
7-26
CHAS