Installing the Series 5400zl Switches
The Series 5400zl Switches are easily installed. They come with an accessory
kit that includes the brackets for mounting the switch in a standard 19-inch
telco rack, or in an equipment cabinet. The switches have rubber feet already
attached so they can be securely located on a horizontal surface. This chapter
shows you how to install your Series 5400zl Switches.
Included Parts
The Series 5400zl Switches have the following components shipped with them:
■
■
■
■
■
ProCurve Series 5400zl Switches Installation and Getting Started
Guide, this manual
ProCurve Manager - CD ROM and booklet
Customer Support/Warranty booklet
Accessory kits
5406zl Accessory Kit (5069-8561)
two mounting brackets
eight 10 mm M4 screws to attach
the mounting brackets to the
switch
four 5/8-inch number 12-24
screws to attach the switch to a
rack
Console cable (5184-1894)
5412zl Accessory Kit (5069-8562)
two mounting brackets - these
brackets are twice as long as the
brackets for the 5406zl switches
eight 10 mm M4 screws to attach
the mounting brackets to the
switch
four 5/8-inch number 12-24
screws to attach the switch to a
rack
2
2-1