HP 5400zl Series Installation And Getting Started Manual page 25

■ high performance—the 5406 Switch has a routing/switching capacity of
288 Gbps, with a switch fabric speed of 346 Gbps and a throughput of 214
Mpps. The 5412 Switch has a routing/switching capacity of 576 Gbps, with
a switch fabric speed of 692 Gbps and a throughput of 428 Mpps
■ plug-and-play networking—all ports are enabled—just connect the
network cables to active network devices and your switched network is
operational
automatic learning of the network addresses in the switch's 16,000-
■
address forwarding table, with configurable address aging value
■ full-duplex operation available on all ports
■ easy management of the switch through several available interfaces:
• web browser interface—an easy to use built-in graphical interface
that can be accessed from common web browsers
• console interface—a full featured, easy to use, VT-100 terminal inter-
face for out-of-band switch management, or for telnet access to the
switch. The console includes complete switch management through
a command line interface (CLI) and a slightly reduced feature set
accessible through an intuitive menu interface
• ProCurve Manager—an SNMP-based graphical interface that is used
to manage your entire network, included with your new switch
• supported by ProCurve Network Manager—an HP OpenView appli-
cation that accurately displays your switch on network maps and
provides a graphical interface for configuring and monitoring your
switch
■ support for the Spanning Tree Protocol to eliminate network loops
support for up to 256 IEEE 802.1Q-compliant VLANs so you can divide the
■
attached end nodes into logical groupings that fit your business needs
■ Layer 3 routing functionality:
• IP static routes
• RIP V1 and V2
• IRDP - ICMP Router Discovery Protocol
• OSPF- Open Shortest Path First
• DHCP relay
support for many other advanced features to enhance network perfor-
■
mance, security, and control— for a description, see the Management and
Configuration Guide which is on the ProCurve Web site. See
details
■ support for IEEE 802.3af standard and pre-standard PoE devices
Introducing the ProCurve Series 5400zl Switches
Switch Features
page 5-1 for
1-15