HP 5400zl Series Installation And Getting Started Manual page 36

Installing the Series 5400zl Switches
Installation Procedures
■
■
Insert module into the guides and
slide it in until it is fully inserted.
Figure 2-1. Module Being Installed in a Chassis
2-10
If you do not use one or more of the slots, ensure the slot cover plate is
still attached over the slot for safe operation and proper switch cooling.
For safety, you should not have more than one module slot uncovered at
a time.
Although these procedures show the 6-slot chassis, the procedures are
the same for the 12-slot chassis.
Open extractor handles