Installing The Series 2300 And 2500 Switches; Included Parts - HP J4818A Installation And Getting Started Manual

Installing the Series 2300 and 2500 Switches

The HP Series 2300 and 2500 switches are easy to install. They each come with
an accessory kit that includes the brackets for mounting the switch in a
standard 19-inch telco rack, in an equipment cabinet, or on a wall, and with
rubber feet that can be attached so the switch can be securely located on a
horizontal surface. The brackets are designed to allow mounting the switch
in a variety of locations and orientations.
This chapter shows you how to install your Series 2300 and 2500 switches.

Included Parts

The Series 2300 and 2500 switches have the following components shipped
with them:
I
I
I
I
The Series 2500 switches have these additional components:
I
I
I
HP ProCurve Series 2300 and 2500 Switches Installation and Getting
Started Guide (5969-2353), this manual
Customer Support/Warranty booklet
Accessory kit (5064-2085)
• two mounting brackets
• four 8-mm M4 screws to attach the mounting brackets to the switch
• four 5/8-inch number 12-24 screws to attach the switch to a rack
• four rubber feet
Power cord, one of the following:
Australia/New Zealand 8120-6803
China 8120-8377
Continental Europe 8120-6802
Denmark 8120-6806
Japan 8120-6804
HP ProCurve Switch Series 2500 Management and Configuration
Guide (5969-2354)
HP TopTools for Hubs & Switches - CD ROM and enclosure
Console cable
Switzerland
United Kingdom/
Hong Kong/Singapore
United States/Canada/Mexico
2
8120-6807
8120-8709
8120-6805
2-1