HP 5400zl Series Installation And Getting Started Manual page 71
Procurve series 5400zl switches
Hide thumbs
Also See for 5400zl Series:
- Reference manual (765 pages) ,
- Installation and getting started manual (135 pages) ,
- Quickspecs (101 pages)
Table of Contents
Advertisement
3.
Insert the power supply into the opening. Slide it all the way in until it
connects to the switch. The power supply face plate will be flush with the
back face of the switch.
Figure 4-2. Power Supply Installation
4.
Tighten the four retaining screws that hold it in place. Be careful not to
overtighten the screws.
For more detail refer to the ProCurve Switch zl Internal Power Supply
Installation Guide (5991-3787).
Replacing Components
Replacing Power Supplies
tighten the four screws
4-3
Hide quick links:
Advertisement
Table of Contents
