AT&T MS2085 User Manual page 17

4-line small business main console
Hide thumbs Also See for MS2085:
Table of Contents

Advertisement

Getting started
Console installation
It takes at least one minute for the console to start up
the system and the screen displays Booting... during
startup. The console is set to obtain the IP address
automatically by default. The screen displays Obtaining
IP from DHCP server Please wait... when the console
is obtaining the IP from the router. When an IP is
obtained, the screen displays IP obtained: XXX.XXX.
X.XXX Please set an extension number to this phone.
If the console cannot obtain IP address automatically, it
displays No IP assigned. Check network. and then the
Network setup menu. You need to enter the IP address
manually under the Set static IP menu. See To set
static IP when initially setting up the console section
(page 12) for details.
To set an extension number:
1.
When the console displays IP obtained: XXX.XXX.
X.XXX Please set an extension number to this
phone, press
/REPEAT or /SKIP to choose the desired
2.
Press
extension number.
3.
Press
/SELECT to save.
MENU
4.
The console displays Please wait... and then
Starting... It takes a while for the system to finish
the startup and the console enters idle screen when
the startup is done. The console is named Console by default.
5.
Wait for approximately one minute for console to synchronize, then lift the
handset. If you hear a dial tone, the installation was successful.
NOTE: This telephone provides minimal functionality during a power outage. When AC power
is not available, many telephone features do not function. The telephone uses power from
L1/2 jack to enable you to make and answer calls using only the corded handset on line 1.
IMPORTANT INFORMATION
1.
Use only the power adapter supplied with this product. To order a replacement power adapter, visit
www.telephones.att.com
our website at
1 (866) 288-4268
In Canada, dial
2.
The power adapter is intended to be correctly oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or
cabinet outlet.
/SELECT.
MENU
1 (800) 222-3111
,
or call
.
11
Obtaining IP from
DHCP server
Please wait...
IP obtained:
XXX.XXX.X.XXX
Please set an
extension number
to this phone.
Set Ext No.
11
.

Advertisement

Table of Contents
loading

Table of Contents