Table of Contents
Advertisement
Getting started
System setup
Prime line
Use this feature, also known as automatic line selection, to choose which line
is automatically selected each time you lift the handset or press
SPEAKER
or HEADSET (if a corded headset is connected) to make an
outside call. If you select Auto, the console picks up any plugged telephone
line starting from Line 1.
To set the prime line:
1.
When the console is idle, press MENU
2.
Press
SELECT again or /SKIP to select
MENU/
System Setup.
3.
Press
or
SELECT or /SKIP.
MENU/
4.
Press
or
SELECT or /SKIP. To exit without making
MENU/
changes, press CANCEL.
NOTE: If you install less than four telephone line cords to the
console and select Auto as your Prime line setting, make sure
you plug in your telephone line cords starting from L1/2 jack.
Avoid having any unoccupied telephone jack between other
occupied telephone jacks.
to scroll to Prime Line, then press
to choose the desired line, then press
.
/SELECT
26
System Setup
Set Ext No.
Remove Ext No.
>Prime Line
Line Group
Network Setup
Network Info
Prime Line
>Line 1
Line 2
Line 3
Line 4
Auto
Advertisement
Table of Contents
