Internal Cable Routing And Connectors - IBM System x3650 M2 Installation And User Manual

Internal cable routing and connectors

Downloaded from www.Manualslib.com
The following illustration shows the internal routing and connectors for the two SAS
signal cables (in server models with eight SAS drive bays).
Notes:
1. To connect the SAS signal cables, make sure that you first connect the signal
cable, and then the power cable and signal cable.
2. To disconnect the SAS signal cables, make sure that you first disconnect the
power cable, and then the signal cable and configuration cable.
The SATA cable is a combination power and signal cable with a shared connector
on both ends. The following illustration shows the internal routing and connector for
the SATA cable.
manuals search engine
CD/DVD SATA cable
Chapter 2. Installing optional devices
39