Kyocera KM-1650 Service Manual page 85

2DA/2DB
Maintenance
item No.
Adjusting the DP magnification
U070
Description
Adjusts the DP original scanning speed.
Purpose
To be executed if the correct magnification is not obtained in the auxiliary scanning direction when the optional
DP is used.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode.
U053 U065
Method
Press the start key. The screen for setting is displayed.
Setting
1. Select the item to be set using the up/down cursor keys. The selected item is displayed in reverse.
2. Change the setting using the left/right cursor keys.
Display
CONVEY SPEED1 Original conveying motor
CONVEY SPEED2 Original conveying motor
Increasing the setting makes the image longer, and decreasing it makes the image shorter.
3. Press the start key. The value is set.
Interrupt copy mode
While this maintenance item is being performed, copying from an original can be made in interrupt copy
mode.
1. Press the interrupt key. The machine enters the interrupt copy mode.
2. Set the original and press the strat key.
To return to the screen for setting, press the interrupt key.
Completion
Press the stop/clear key at the screen for setting. The screen for selecting a maintenance item No. is dis-
played.
1-4-16
U070
Description
speed (simplex original)
speed (duplex original)
Description
Setting range
-25 to +25
-25 to +25
Initial Change in
setting value per step
0 0.1%
0 0.1%