Kyocera KM-1650 Service Manual page 183

2DA/2DB
7. Temporarily push the bypass paper feed pul-
ley unit into the rear side to unlock the front
side and then remove it from the MFP.
8. Remove the bypass paper feed pulley from
the bypass paper feed pulley shaft.
9. Push the fitting portions of the bypass sepa-
ration pad. Remove the bypass separation
pad from the MFP.
10. Replace the bypass paper feed pulley and
bypass separation pad and refit all the
removed parts.
1-6-14
Bypass paper feed pulley unit
Figure 1-6-25
Bypass paper feed pulley
Figure 1-6-26
Bypass separation pad
Figure 1-6-27
Bypass paper feed
pulley shaft