Kyocera KM-1650 Service Manual page 79

2DA/2DB
Maintenance
item No.
Return of backup data
U027
Description
Transfers the backup data of the EEPROM which was transferred with the U026 to flash memory.
Purpose
To use after the main PCB replaced.
Method
1. Press the start key. The screen for executing is displayed.
2. Select the EXECUTE using the up/down cursor keys. It is displayed in reverse.
3. Press the start key to transfer the backup data. The screen displays the result.
EXECUTE
CHECK SUM: ****
CODE : XXXX (See the table below)
Code
0000
0203
4. Disconnect and connect the power plug.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Checking motor operation
U030
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the motor to be operated using the up/down cursor keys.
3. Press the start key. The operation starts.
Display
MAIN
RES
T1
T2
T3
EJE1
EJE2
*1: Optional. *2: Optional for 16 ppm model. Standard for 20 ppm model.
4. To stop operation, press the stop/clear key.
Completion
Press the stop key after operation stops. The screen for selecting a maintenance item No. is displayed.
1-4-10
Description
Description
Processing ends correctly.
Check sum does not agree when reading out from the EEPROM.
Operation
Drive motor (DM) operates
Registration motor (RM) operates
Drawer drive motor 1
Drawer drive motor 2
Drawer drive motor 3
Eject motor rotates forward
Eject motor rotates in reverse
*2
(DDM1) operates
*1
(DDM2) operates
*1
(DDM3) operates