Kyocera KM-1650 Service Manual page 62

2DA/2DB
Attach the modular cover.
16. Attach the modular cover that has been
removed by Procedure 8 with the screw to
the position shown in the illustration.
Install the shield cover.
17. Insert the lower part of the shield cover that
has been removed by Procedure 7 into the
shield box and then attach it with the six
screws and TP tap tight screw M4 x 6 to its
original position.
Connect the telephone line to the line terminal.
18. Insert the modular connector cable to the
line terminal to connect it to the telephone
line.
For 120 V specifications, use supplied mod-
ular cord B.
1-3-38
Shield cover
Screw
Screw
Screw
TP tap tight
screw M4 x 6
Screws
Modular connector cable
Screw Modular cover
Figure 1-3-73
Shield box
Figure 1-3-74
Figure 1-3-75
Lower part
Line terminal