Kyocera KM-1650 Service Manual page 175

2DA/2DB
7. Remove the springs, stop ring and bushing
and then the shaft holder from the upper
paper feed unit.
8. Remove the forwarding pulley from the
upper paper feed unit.
9. Remove the paper feed pulley from the
upper paper feed unit.
10. Replace the forwarding pulley and paper
feed pulley and refit all the removed parts.
1-6-6
Spring
Upper paper feed unit
Figure 1-6-8
Forwarding pulley
Figure 1-6-9
Shaft holder
Spring
Stop ring
Bushing
Paper feed pulley