Kyocera KM-1650 Service Manual page 108

Maintenance
item No.
Switching copy operation at toner empty detection
U258
Description
Selects if continuous copying is enabled after toner empty is detected, and sets the number of copies that can
be made after the detection.
Purpose
To be set according to user request.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select single or continuous copying using the up/down cursor keys. The selected item is displayed in
reverse.
Display
SINGLE
CONTINUE
Initial setting: SINGLE
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Changing the copy count timing
U260
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user (copy service provider) request. If a paper jam occurs frequently in the finisher
when the number of copies is counted at the time of paper ejection, copies are provided without copy counts.
The copy service provider cannot charge for such copying. To prevent this, the copy timing should be made
earlier. If a paper jam occurs frequently in the paper conveying or fixing sections when the number of copies is
counted before the paper reaches those sections, copying is charged without a copy being made. To prevent
this, the copy timing should be made later.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the copy count timing using the up/down cursor keys. The selected item is displayed in reverse.
Display
FEED
EJECT
Initial setting: EJECT
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for
selecting a maintenance item No. is displayed.
Description
Description
Enables only single copying.
Enables single and continuous copying.
Description
When secondary paper feed starts
When the paper is ejected
2DA/2DB
1-4-39